VIP Sprinter 4×4 on the Prague riverfront
Expedition & motorhome vehicles

VIP Sprinter 4×4

A commission for a private client

A vehicle for clients who want comfort and luxury but also safety and complete privacy. The VIP Sprinter is built to order down to the last detail — and it is also a demonstration of how far we can go with a fit-out.

Structure

The rear body and the rear axle are widened by 240 mm (9.4 in); the axle runs on air suspension for maximum comfort. Drive is 4×4 and the vehicle is limited to 140 km/h (87 mph). Wheels and rims are made to measure, so they take both the load and rough ground.

Exterior

A stainless side frame visually lowers the vehicle, protects the underbody and hides a powered step. The roof carries solar panels for the batteries and the air handling unit. Auxiliary LED spotlights sit at the front.

A 360° camera system records around the vehicle and the owner can reach the footage from anywhere in the world.

Interior

The leather seats are powered and homologated to EU standards; the interior is finished in wood, leather and leatherette. The built-in bar is LED lit, every seat has a powered folding table and a cooled glass holder.

Two smart TVs, Blu-Ray, CD, a home cinema with Jamo speakers, Wi-Fi, a 40-litre fridge and an intercom to the driver. The space is set up for smokers as well — ashtrays and air handling with strong extraction.

Privacy

The windows can be switched opaque and have powered blinds. A partition — solid and glazed — opens electrically between the driver and the rear. The vehicle carries a device that makes listening in on the cabin impossible.

Electrical systems are controlled from a tablet or a phone, with touch panels in the walls. Vehicle status runs through the Pandora system in the owner's phone.

Details

Wireless chargers, sockets and USB ports, umbrella holders with drainage, a concealed bin, a safe, independent heating in the rear and plenty of storage.

Photo gallery